Assembly & Operational Instructions
3
USING THE ELECTRONIC TIMER
1. To time your workout, begin by pressing and holding the
button on the face of the timer until zeros are displayed.
Release the button.
2. Start the timer by pressing and releasing the button. Now
you are ready to begin your workout.
3. To stop or pause the timer, press and release the timer
button. This freezes the workout time. To resume your workout without losing the
time displayed before stopping or pausing, press and release the button again.
4. When you complete your workout, press and release the timer button. The timer will
automatically turn off after being in stop or pause mode for 4 minutes.
TIMER Function:
The electronic timer displays minutes and
seconds up to 99:59.
BATTERY:
The electronic timer operates with a 3v CR2032 lithium battery, included.
Replace the battery when you see inconsistencies in the display.
MAINTENANCE
The safety and integrity designed into the
Folding Upper & Lower Body Cycle
can only
be maintained when the
Folding Upper & Lower Body Cycle
is regularly examined for
damage and wear. Special attention should be given to the following:
1. A light oil is applied to the pedals of your
Folding Upper & Lower Body Cycle
before
shipping. Reapply oil if the pedals begin squeaking.
2. Verify that all nuts and bolts are properly tightened.
3. Use only Stamina Products components for maintenance and repair. For replacement
parts, contact us at [email protected] or call 1-800-375-7520.
4. Keep your
Folding Upper & Lower Body Cycle
clean by wiping with an absorbent cloth
after use.
NOTE:
Even after the timer automatically turns off, the time that was displayed prior to
shut off will remain in memory. To resume your workout without losing the time
displayed before stopping, press and release the timer button. To clear the time
and start a new workout, start again at step 1.
FOLDING AND STORAGE
1. To store the
Folding Upper & Lower Body Cycle
,
simply keep it in a clean dry place.
2. The minimum folded dimensions of the
Folding Upper & Lower Body Cycle
are
approximately 16.5" long x 14.4" wide x 5.2" tall. Please measure your
Folding Upper
& Lower Body Cycle
if exact dimensions are needed.
3. To fold, remove the LOCKING KNOB(15), and fold the FRONT FRAME(2) to the
MAIN FRAME(1). Reattach the LOCKING KNOB(15) to the FRONT FRAME(2).
4. To avoid damage to the TIMER(20), remove the battery before storing for one year or
more.
