manualshive.com logo in svg

GOLDONI Aster 35, Operation And Maintenance

Share
Download
GOLDONI Aster 35 Operation And Maintenance Download Page 50

 

50

Track widths 

The tractor can be equipped with adjustable, reversible wheel discs that allow the track 
width to be changed. 
 
Whenever the wheels are reversed, check to make sure that the arrows indicating the 
turning direction on the tyre are pointing in the correct direction. 
 

 

The overall width of the tractor is governed by laws when the tractor is driven on the 
roads: comply with the laws in force in the country of use. 
 

 

WARNING: When disassembling the tyres: 

• 

Take the greatest care 

• 

Use tools and equipment that set the tractor in safe conditions 

• 

Use tools to lift heavy wheels.

 

Wheel bolt torque values 

A 

The driving torque to fix the flange to the 

disc is: 

ø 

12” = 10Kgm (98Nm) 

ø 

15”/16” = 15Kgm (147Nm) 

ø 

18”/20”/24” = 25Kgm (245Nm) 

 

B 

The driving torque to fix the wheel disc to 

the hub is: 
Front (M14X1.5) = 15Kgm (147Nm) 
Rear (M16X1.5) = 22Kgm (215Nm) 
 

Transmission ratio 

The ratio between the tip speed of the front 
and rear wheels must be accurately 
determined so that the front wheels are in 
advance. failing this, the tyres will be 
subjected to excessive wear. 
Ask your dealer for advice when you 
change the size of tyres. 
 

Summary of Contents for Aster 35













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands