User manual – Goldmund THA2 Telos Headphone Amplifier - 9 -
6
MAINTENANCE AND CLEANING
The THA2 usually requires no maintenance. Please contact your Goldmund approved
dealer if any maintenance should be required.
Always turn the power OFF before cleaning your THA2. To clean the external metal of the
amplifier, always use a clean, soft, damp cloth. Dampen it with water or a mild detergent
solution. Avoid abrasive or harsh cleansers (e.g. products containing sodium carbonate).
The identification plate is plated with precious metal. Simply clean it with a soft cloth,
without any chemical solution.
7
TECHNICAL DATA
POWER SUPPLY
• Nominal mains voltage: 117 V or 234 V (switchable), 50 to 60 Hz
• Mains voltage range: +/- 10 %
• 1.6A slow-blow fuse
• Separated ground and earth signal
• Connection between earth and ground to cancel all
ground loops
INTERFACE AND FUNCTIONS
• Input selectable through front panel switch
• Binaural mode switch according to the publication “Improved Headphone Listening” of
Siegfried Linkwitz
• USB device: Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on
Linux, driver required only for Windows)
• 1 x Toslink Optical or Digital S/PDIF coaxial RCA 75 Ohms
• 1 x Analog RCA (Left & Right): ADC conversion for DSP correction
• RS232 Command connector
• ON/OFF power switch key
• Sample rate up to 384 kHz/Bit depth up to 32
• DSD over PCM capabilities
• Digital volume knob on front panel
• Gain adjustable for low/high sensitivity headphones.
