GOLDMUND TELOS 360 - Universal Power Amplifier - 6
2
AMPLIFIER LOCATION & COOLING
The GOLDMUND TELOS 360 amplifier as all high quality amplifiers generate heat when
driven at high levels and must be vented properly. It is mandatory to allow a proper cooling
of the heat sinks. Do not put temperature sensitive equipment on top of the amplifier.
Due to its weight, and to maximize the effect of the built-in "Mechanical Grounding"
construction, the TELOS 360 is better located on the floor. Other very strong supports can
be used if they offer rigid transmission to the floor. The TELOS 360 is built on four very
hard conical feet to ensure proper vibration transmission to the amplifier support. This
evacuates all detrimental vibrations inside the amplifier, following the famous GOLDMUND
"Mechanical Grounding" principle.
If you use more than one TELOS 360 at any location, you may decide to stack them. Be
careful that the conical feet of the top amp are inserted properly on the top of the steel bars
of the amplifier located below. You may stack up to 3 amps provided extra care is taken to
ensure proper air circulation vents the rear heat-sinks.
Depending on the flatness of the surface where the amplifier will be located, you will adjust
the four round flat feet of the amplifier to allow full contact of the points with the support.
3
LINE VOLTAGE ADJUSTMENTS
A voltage selector is provided inside the amplifier.
If your line voltage is not adapted to the voltage indicated of your location please consult
your local GOLDMUND dealer for internal adjustment.
ATTENTION:
On the 220V configuration, the GOLDMUND TELOS 360 amplifier will
function properly for main line voltage between 211V and 257V. On the 110V configuration,
the main line must deliver between 105 and 129V. If your main line is usually out of these
tolerances, please consult your GOLDMUND dealer.
Please check the value of the main line fuse. This fuse is located on the back panel of the
amplifier, above the power cord receptacles. Use an 8A delayed fuse.
