GOLDMUND TELOS 2500 - Universal Power Amplifier - 14
7
SAFETY FEATURES
The GOLDMUND TELOS 2500 amplifier provides sophisticated features to protect the
amplifier and the speakers against all mishandling or component failure. However
precautions must be taken to avoid problems with a very high power amplifier.
PROTECTION AGAINST DC
PROTECTION AGAINST DC
PROTECTION AGAINST DC
PROTECTION AGAINST DC
The TELOS 2500 is a DC-coupled amplifier. If the associated preamplifier is badly
designed or defective (often true for the tube preamplifiers), the speakers could be
damaged.
In such a case, the DC protection circuit of the TELOS 2500 will automatically turn off the
amplifier. This detection circuit is totally immune to any sonic effect.
To indicate that the amplifier has been turned off by the protection circuit, a red led will be
displayed on the front panel.
When the source of DC offset is suppressed, turn ON the amplifier again.
PROTECTION AGAINST HF OSCILLATIONS
PROTECTION AGAINST HF OSCILLATIONS
PROTECTION AGAINST HF OSCILLATIONS
PROTECTION AGAINST HF OSCILLATIONS
In the same way, the speaker must be protected against a large amount of high frequency
oscillation, if present, before and after to avoid any danger for the tweeters, even if these
frequencies remain unnoticed.
The amplifier is by itself extremely stable. However some mishandling must be avoided in
order to avoid any oscillation:
• Never plug an input cable into a power amplifier when it is turned on.
• Be careful to use only very high quality interconnects. If the ground connection becomes
loose, there is a big danger of oscillation. Warranty is voided if this occurs.
• Never run the input and output (speaker) cables in parallel.
If the TELOS 2500 detects excessive oscillation, the amplifier will be turned OFF
automatically. You will have to suppress the source of oscillation and turn it ON again once
the protection is activated.
