User manual - GOLDMUND MIMESIS 24 UNIVERSAL PREAMPLIFIER |
P 11
3
3.1
O P E R AT I N G
T H E M I M E S I S 2 4 U N I V E R S A L P R E A M P L I F I E R
F R O N T PA N E L K E Y B O A R D F U N C T I O N S
- Input Source Selection for other Zones:
The zone selection is made by turning the left knob.
The selected zone appears on the first 2 digits of the display.
Browse the existing zones (Zone creation is made in the configurator program during the
initial machine installation).
When you have reached the zone you want to change the input for, select it by pressing the
“MODE” key and then select the input using the 7 channel keys, as for the local zone.
The back panel inputs are selected by pressing the front panel keys marked from “CH1” to
“CH7”.
When only one of these keys is pressed and you were listening to an analog source, the
corresponding source is selected and transmitted to the unit for the corresponding zone. The
corresponding green Led indicates this selection.
To activate one of the 7 digital inputs, click twice on the channel you want to listen to.
After you have selected one of the digital inputs, the Mimesis 24 will be in the “digital input”
mode and the next channel you will click once will again select a digital input. If you want
to select an analog input you will have once again to click twice on the needed channel key
to return in the analog mode.
When a digital input has been selected, the corresponding key will light in green as soon as
the digital source has locked to the source frequency.
- Recording Source Selection:
Any source can be selected to be recorded independently from the source which is played
(it can be the same or a different one).
To select the source that will be recorded, first use the left knob to browse to select one of
the recording zones set up in the computer configurator. From factory, the zone 17 is set to
the analog tape machine and zones 13, 14, 15 and 16 for the digital recording machines.
When you reach the zone corresponding to the machine you want to record to, select it by
pressing once the “MODE” key, then select the source to record on this recording machine
by pressing one of the channel keys.
