User manual – Goldmund MIMESIS 16 UNIVERSAL PREAMPLIFIER - 11 -
2
OPERATING THE MIMESIS 16 ctd
2.2
REMOTE CONTROL ctd
During the balance adjustment you can activate a pink noise. To activate the pink noise,
press on the “BAL” key and then on the “PINK NOISE” key. A Pink noise will be generated
on each digital audio output. If you press again on the “PINK NOISE” key, the pink noise
will be generated to only one output. Each time you press on the “PINK NOISE” key, the
pink noise will change of output as described below:
All outputs
⇒
Front-Left
⇒
Center
⇒
Front-Right
⇒
Rear-Right
⇒
Rear-Left
⇒
Subwoofer
⇒
All outputs
⇒
…
Note: After the last key pressed for pink noise, a timer of 20 seconds is activated. At the
end of 20 sec the pink noise is automatically cancelled.
INPUT SOURCE SELECTION
The 1 to 14 keys are selecting the source to listen. Digital inputs are numbered from 1 to 8.
Analog Inputs are numbered from 9 to 14.
OUTPUT AUDIO FORMAT SELECTION
Depending on the capabilities of the sources you have selected to listen, several audio
formats may be accessible for the output.
Each time you press on the “FORMAT” key, you change the audio format of the outputs to
one of bellow if permissible:
-
G2 (2.0-channel)
-
G6 (5.1-channel)
-
Direct
The format selected is shown on the front panel by Led.
Note:
The Direct format allows to send the input
selected to the “Direct Out” cinch without
attenuation. Only the digital input 1 to 6 and the
analog (2-channel) input can be sent to the
Direct output. When the format “Direct” is
activated, the standards outputs of the
Mimesis16 are muted.
