GOLDMUND MIMESIS 15
– Acoustic Processor - 11
8
REMOTE CONTROL
Your Mimesis 15 has a built-in remote control for volume, balance and input selection.
The Mute circuit can also be activated via the remote. To mute or un-mute the Mimesis 15
with the remote,
press the “MUTE/STBY” key briefly.
To put the Mimesis 15
in Standby mode, press the “MUTE/STBY” key continuously until the
Mimesis 15 goes to Standby (indicated via the Standby Led on the front panel).
The VOL+ and VOL- keys adjust the general volume.
The 4 balance keys (for details on the remote control see chapter 12, p.16) control the
Left/Right and Front/Rear balance, maintaining a constant overall volume.
To activate this balance control, first, press t
he “BAL” key on the remote control. Then,
adjust the balance, using the balance keys, Left/Right (4 & 6), Front/Rear (3 & 5) only with
multichannel signal.
Note: Adjustment can be done when the led on the “Bal. On” key is lit.
Any RC5 coded remote-control emitter can control the Mimesis 15. The codes are available
upon request. Most of the programmable transmitter units available have the capabilities to
drive the Mimesis 15 as a standard digital processor, for all the specified functions.
Note:
The Mimesis 15 can be controlled by the iGoldmund System, please refer to the
iGoldmund manual for more detail.
9
CLEANING
Always disconnect the power cord from the wall socket before cleaning your processor.
To clean the metal of the processor, always use a very soft, clean, damp cloth to avoid
scratching the surface. Dampen with water or a mild detergent solution. Avoid abrasive or
harsh cleansers (e.g. products containing sodium carbonate).
