GOLDMUND METIS 8 – 2-channel Acoustic Processor - 11
7
FRONT PANEL FUNCTIONS
7.1
INPUT SOURCE SELECTION
The back panel inputs are selected by turning the knob on the left of the front panel.
The first 3 positions are for analog inputs, the next 7 for digital inputs.
When a digital input has been selected, the format 2.0 will be displayed on the front panel
only when the digital source has been locked to the source frequency
7.2
OUTPUT VOLUME ADJUSTMENT
The level control may be adjusted manually (right knob on the front panel) or by the remote
control.
It acts for all channels simultaneously if the unit is playing a multi-channel source
.
8
REMOTE CONTROL
Your Metis 8 has a built-in remote control for volume, balance and input selection.
The Mute circuit can also be activated via the remote. To mute or un-mute the Metis 8 with
the remote press the “MUTE/STBY” key briefly.
To put the Metis 8 in Standby mode, press the “MUTE/STBY” key continuously until the
Metis 8 goes to Standby, indicated via the Standby Led on the front panel.
The VOL+ and VOL- keys adjust the general volume.
The 2 balance keys (for details on the remote control see chapter 12, p.16) control the
Left/Right balance, maintaining a constant overall volume.
To activate this balance control, first, press the “BAL” key on the remote control. Then,
adjust the balance, using the balance keys, Left/Right (4 & 6).
Note: Adjustment can be done when the led on the “Bal. On” key is lit.
Any RC5 coded remote-control emitter can control the Metis 8. The codes are available
upon request. Most of the programmable transmitter units available have the capabilities to
drive the Metis 8 as a standard digital processor, for all the specified functions.
