GOLDMUND
Logos Tower Active Speaker - 7
4
CONNECTIONS
Wiring:
Usable in any type of configuration, the LOGOS TOWER has built-in amplifiers with built-in
input crossovers. The input is an unbalanced digital input (S/PDIF).
When used with a digital input signal, connect the digital cable to the digital input
connector. Since a digital Spdif cable carries 2 channels you may link the digital output to
the next speaker to transfer the second channel.
Wireless:
To achieve optimal performance, please observe the following points:
•
The LOGOS TOWER and the USB dongle or Wireless Transmitter should be
placed in the same room.
•
There should be no metallic obstacles between the USB dongle or Wireless
Transmitter and the LOGOS TOWER, which could influence the wireless link.
•
The computer with the USB dongle should not be moved around during playback.
Wireless audio link range:
The range of the wireless audio link depends on several factors, such as the amount of
WiFi equipment used in proximity of the LOGOS TOWER system, as well as the building
materials and the architecture of the room.
Depending on the above mentioned factors, the maximum range will normally be from 5 to
20 meters.
To use the LOGOS TOWER in wireless, follow these steps:
•
Connect the speaker to a mains outlet using the power cords contained in the box.
