GOLDMUND EIDOS 36T - CD Player -
10
8 SWITCHING
ON
After making sure that everything is connected properly and that the player is plugged in,
press
STANDBY
on the remote control or any key on the keyboard of the Eidos 36T to
switch the player on.
You can also use the
OPEN/CLOSE
button to switch on the player and open the disc tray
at the same time.
9 PLAYING
DISCS
The basic playback controls are covered here.
1 - If the player isn’t already on, press STANDBY/ON on remote to switch it on.
2 - Press OPEN/CLOSE to open the disc tray.
3 - Load a disc.
Load a disc with the label side facing up, using the disc tray guide to align the disc. Never
load more than one disc at a time.
4 - Press PLAY to start playback.
Basic playback controls
The controls on the remote for playing discs are listed below.
PLAY
:
Starts playback.
PAUSE
:
Pauses a disc that’s playing, or restarts a paused disc.
STOP
:
Stops playback.
