GOLDMUND EIDOS 20CD - CD Player - 6
2
SETTING UP THE EIDOS 20CD
2.3
CHOICE OF PLAYER LOCATION
Due to the specific quality of its Goldmund "Mechanical Grounding" construction, the
Goldmund Player is less critical than other designs in placement selection. Feedback is
mostly so low that no special precaution is required. Nevertheless, position the player as far
as you can from all speakers if you want to totally avoid the air coupling between the
speakers and the player.
Locate the player on a support providing the most rigid possible connection to the floor.
Solid coupling is essential, and if your support is standing on a suspended floor, at least one
foot should be located over a supporting beam or close to a supporting wall for an optimal
result.
2.4 POWER
CONNECTION
Plug the AC power cord into the back of the EIDOS 20CD and in a wall socket. Switch the
back power switch ON and press
STANDBY/ON
on the remote control to switch the player
on.
You can also use the
OPEN/CLOSE
button to switch on the player and open the disc tray at
the same time.
When first activated the system will take a few seconds to load and verify all settings before
illuminating the display. This delay is normal. On completion, the front display will be
illuminated as you press any key or when pressing the remote control STANDBY/ON button,
meaning the unit is now powered on.
This player features a screen saver. If the player is stopped or paused and no button is
pressed for five minutes, the screen saver starts.
