background image

OWNER’S MANUAL 

GOLDFISH 28 TENDER

Page 10

2.4  MOORING 

After mooring make sure that your Goldfish is properly fastened using the boat’s cleats. If necessary 
use fenders to protect the boat - remember that fenders are also used to protect other boats from 
damage from your boat.

Trim up the drive to avoid corrosion and growth on the engine.

Switch the main power switch to the OFF position whenever leaving the boat for more than 24 hours.

Check that all lockers are closed.

Put rear backrest in sunbed position and put on the harbor cover to protect the boat.

2.5  FUEL & OIL

The fuel filler for the Goldfish 28 Tender is located on the aft 
base of the rear seat. 

To  remove  the  fuel  filler  cap,  use  the  special  tool  that  is 
provided with your boat and unscrew the cap. Your 28 Tender 
will run on ordinary unleaded petrol.

If your Goldfish 28 Tender is equipped with one or two two-
stroke engine a seperate oil tank is fitted to give an optimal 
fuel/oil mixture at all times. This oil tank is located under the 
hatch immediately in front of the fuel filler cap, and an alarm 
will sound when the oil level is low. Please refill with appropriate 
two-stroke oil when the alarm goes off. Simply unscrew the 
filler cap on top of the oil tank and pour oil according to your 
engine specification in the tank.

Summary of Contents for 28 tender






















Reviews: