background image

Triton Three Owner’s Manual 

GoldenEar Technology

  

 

Triton Three Manual

Positioning Triton as Left/Right Fronts

To ensure the best performance possible, observe the following placement 
guidelines:

Accurate Timbre: For the most accurate and natural timbre, speakers’ 

high-frequency drivers should be at approximately ear level. 

Balanced Bass: Placing speakers in corners will over-emphasize bass and 

reduce overall clarity. If possible, position speakers 8 in (20 cm) or more from 

the wall behind the speaker and as much as possible from either side wall. 
This will ensure better bass performance and optimal midrange clarity. If you 
can’t, don’t worry; just use the subwoofer level control on the back of the 

speaker to adjust for optimum sound in your room.

Best Imaging: Measure the distance from your main listening area to the left 
front speaker (we’ll call this distance “X”). For optimal imaging and largest 

soundstage, place speakers “X” distance apart from each other (and no less than 

3

/

4

 of that distance — 

3

/

4

 of 

“X”). To further optimize imaging, turn speakers inward so they point toward the listening position with their axes 

crossing just behind it.

Positioning Triton as Surrounds

When used as surround speakers, Triton speakers may be located on the side or behind the listeners. When used 
on the sides, take care never to locate the speakers forward of the listeners (A). If the speakers are placed along 
the rear wall as surrounds, it is suggested that they be positioned fairly wide apart if possible. For instance, if there 

is a couch in the center of the rear wall on which the listeners will sit, try to position the speakers wider apart than 

the couch (B). 

Speaker Break-in

Your new Triton loudspeaker system should sound good right out of the box; however, an extended break-in 

period of 40-60 hours or more of normal playing time is required to reach full audiophile performance 

capability. Break-in allows the driver suspensions to work-in and crossover components to “heal,”  resulting 

in fuller and tighter bass, a more open “blossoming” midrange and smoother high frequency reproduction.

8

Summary of Contents for Triton Three

















Reviews: