background image

Invisa 

®

 HTR 7000/8000 Owner’s Manual 

GoldenEar

 

Invisa HTR 7000/8000 Manual

Congratulations!

 

Congratulations and thank you for purchasing GoldenEar’s

 Invisa

®

 HTR 7000/8000 speakers!  

 

You are about to hear the spectacular difference these very special FocusField Technology  

 

In-Ceiling speakers will make in your music and/or home theater system! 

 

Our engineers’ many years of experience in developing loudspeakers has led to these  

 

extraordinary products. In order to ensure that you experience maximum performance,  

 

please take a moment to fully read this owner’s manual and familiarize yourself with the  

 

unique installation, assembly and set-up procedures for your Invisa HTR 7000/8000 speakers- 

 

based music and home theater system.

 

Please visit our website at www.GoldenEar.com for more information on the technology behind   

 

your new speaker system. If you have additional questions, contact your Authorized GoldenEar

  

Dealer or visit the Q&A page in the Tech Support section of our website.

Your New GoldenEar Speakers

GoldenEar Invisa HTR 7000/8000 in-ceiling speakers are designed to fit beautifully in a wide variety of applications. 
Their low-profile grille and nearly invisible design allows for perfect integration in a wide variety of locations within 
your home. To get the best performance possible and for a product that lasts a lifetime, we strongly recommend 
that you follow the placement and setup guidelines provided in this manual.

Cleaning

Do not use a strong or abrasive cleaner on your new speakers’ grilles. Clean them only with a damp cloth, but do 
not get them wet. 

Preventing Speaker Damage 

       

GoldenEar Invisa

 

HTR 7000/8000 speakers are efficient and can be driven to loud listening levels with  

moderate amplifier power. They are also able to handle the output of very powerful amplifiers. To prevent  

damage to your speakers, please read all of the following guidelines before hooking them up. 

2

USE AN APPROPRIATE AMPLIFIER. 

At high volumes a very powerful amplifier can overdrive your  

speakers and damage them. And if the amplifier is not powerful enough, it can produce distortion 

that can easily damage your speaker. (Consult your dealer for assistance.)

DON’T BE FOOLED BY YOUR RECEIVER’S VOLUME CONTROL. 

It only adjusts listening level; it is not an 

indication of power output. If your speakers begin to sound harsh or grating or if you hear other forms 

of distortion, turn down the volume immediately!

A

void use of tone controls and loudness controls as they will demand even more power from  

an amplifier, lowering the volume at which damage could occur.

InvisaHTR7000_8000Manual_06_21_21.indd   2

InvisaHTR7000_8000Manual_06_21_21.indd   2

6/23/21   8:13 AM

6/23/21   8:13 AM

Summary of Contents for Invisa HTR 7000
















Reviews: