GoldenEar Technology Invisa 525 Owner'S Manual Download Page 2

GoldenEar Technology

8

Invisa 525-650 Manual

Invisa 525-650 Owner’s Manual 

2

Congratulations!

 

Congratulations and thank you for purchasing GoldenEar Technology’s

®

 Invisa

®

 speakers! You are about to hear 

 

the spectacular difference these very special In-Wall/In-Ceiling speakers will make in your home’s music system! 

 

Our engineers’ many years of experience in developing loudspeakers has led to these extraordinary products. 

 

In order to ensure that you experience maximum performance, please take a moment to fully read this owner’s 

 

manual and familiarize yourself with the unique installation, assembly and set-up procedures for your 

 Invisa

®

 speakers.

 

Please visit our website at www.GoldenEar.com for more information on the technology behind your new speaker  

 

system. If you have additional questions, contact your Authorized GoldenEar Technology

®

 Dealer or visit the 

 

Q&A page in the Tech Support section of our website.

Your 

New 

GoldenEar 

Speakers 

       

GoldenEar Invisa

®

 in-ceiling/in-wall speakers are designed to fit beautifully in a wide variety 

of applications. Their low-profile grille and nearly invisible design allows for perfect integration in a wide variety 
of locations within your home. To get the best performance possible and for a product that lasts a lifetime, we 

strongly recommend that you follow the placement and setup guidelines provided in this manual.

Cleaning

Do not use a strong or abrasive cleaner on your new speakers’ grilles. Clean them only with a damp cloth, but do 
not get them wet. 

Preventing 

Speaker 

Damage        

GoldenEar Technology Invisa

® 

speakers are efficient and can be driven to loud listening levels with moderate 

amplifier power. They are also able to handle the output of very powerful amplifiers. To prevent damage to your 

speakers, please read all of the following guidelines before hooking them up. 

USE AN APPROPRIATE AMPLIFIER. 

At high volumes a very powerful amplifier can overdrive your 

speakers and damage them. And if the amplifier is not powerful enough, it can produce distortion 
that can easily damage your speaker. (Consult your dealer for assistance.)

DON’T BE FOOLED BY THE VOLUME CONTROL. 

It only adjusts how loud, it is not an 

indication of power output. If your speakers begin to sound harsh or grating or if you hear other forms 
of distortion, turn down the volume immediately!

A

void use of tone controls and loudness controls as they will demand even more power from 

an amplifier, lowering the volume at which damage could occur.

Summary of Contents for Invisa 525

















Reviews: