1
2
PA
TE
Battery Back Up System
Your Golden power lift chair comes with a battery back up system so the chair
can return to the seated position in the event of a household power failure. The
batteries have enough energy to bring the chair to a seated position from the
recline position.
The batteries do not have enough energy nor are they intended to
operate the chair for a prolonged period of time in the absence of standard household
voltage (120 volt, 60 Hz).
Batteries should be replaced after one
use.
Batteries should be changed yearly. (See installation page
8
)
Smart Tek™ (Power Indication)
Your power lift chair is equipped with an indicator light on the hand control. This
light illuminates green when any button on the hand control is pressed, indicating
power to the hand control.
Your power lift chair also comes with a power indicator light on the transformer
and on the power cord connecting the motor to the transformer. The lights
illuminate green constantly, indicating power from the outlet to the transformer
and the motor. The lights have been provided to help you identify electrical
disconnects, should they occur, and to help your provider to diagnose electrical
problems, should they occur.
Should the chair not operate and the lights are out, check all electrical
connections to the chair. Make sure everything is plugged in properly and there
is power to the outlet into which the chair is plugged (see installation on page
8
for electrical connections).
Should you ever encounter a problem with
the operation of your power lift chair and the lights are on, such as
mechanical problems or one light is out, discontinue all use of the
product upon discovery of the problem.
Contact the provider from
whom you purchased your chair. They will be able to resolve problems and take
care of proper factory service if needed. You will need to be prepared to
answer some basic questions about your power lift chair, such as
model and serial number.
The model and serial number are located on
the back of the hand
control
warning label attached to the cord
and the rear
of the lift frame.
Your provider will ask you questions about your power
indicator lights, such as which one is out. Prior to calling your
provider, check all the electrical connections to the chair. Make sure
everything is plugged in properly and there is power to the outlet into
which the chair is plugged (see installation on page
8
for electrical
connections).
N
ED
T
N
