Golden MAXICOMFORT PR515-MLA Owner'S Manual Download Page 6

6

Do not smoke while operating, sitting or resting in the chair.

To reduce risk of electrical shock, do not immerse any of the 
electrical components into a liquid, or spill any liquids onto electrical 
components. Do not open any of the electrical components. There are 
no serviceable parts.

Warranty will be void if any of the electrical components are opened by 
other than a qualified service person.

Make sure the chair is placed at the specified distance from a wall/
corner (page 7). Failure to do so can damage the chair and will void 
the warranty.

Do not use any type of electrical extension cord to plug your 
chair into an electrical outlet. Make sure that all electrical 
products and their wires are positioned away from your chair 
as the metal lift frame mechanism could crush them and 
create a fire hazard and/or may cause personal injury.

Do not operate your lift chair while intoxicated or taking medications 
that impair your mental or physical abilities to operate the chair safely. 
Consult with your doctor about any medications you are taking that 
may affect the safe operation of the chair.

Do not operate this product if you have any medical conditions that 
result in limited, debilitating mental or physical capacity. You should 
consult your doctor before using this product.

Consult with your physician regarding using the Trendelenburg 
position.

Placing the lift chair in the center of a room or too far away from a wall 
will create a tripping hazard, because the power wires for the lift chair 
will be crossing main traffic areas in the residence.

Leakage from the 9 VDC backup batteries can result in property 
damage. Periodically inspect and replace the batteries. Read the 
“Battery Back Up System” and “Care and Maintenance” sections in 
this manual.

If the lift chair user is unconscious or sleeping the hand control may 
inadvertently become activated in a way that may force the user out 
of the chair. 

Should you ever encounter a problem with the operation of your power 
lift chair, discontinue all use of the product upon discovery of the 
problem. Contact the provider from whom you purchased your chair 
to arrange service.

Exceeding the stated weight limit listed in this manual can result in 
instability of the lift chair, causing a potential tip over hazard.

Summary of Contents for MAXICOMFORT PR515-MLA

























Reviews: