Golden MAXICOMFORT EZ Sleeper PR-761, Owner'S Manual

Page: 12 / 24

12
A
uto
D
rive with
t
wilight
-C
ontrol
o
perAtion
M
odel
PR761
1. Getting into your lift chair. While standing next to your chair, press button
(S7) and raise the chair to a height you can sit against. This height will vary
from person to person depending on the individual’s needs. Raise the chair
high enough so you do not have to flop down into the chair.
Flopping down
into the chair will damage it and could cause personal injury. Press
button (S5). As the chair continues downward, adjust yourself into a position
that is comfortable to you. Continue holding button (S5) until chair is in the
seated position (chair firmly on the floor), then release the button. You can
also press buttons (S6, S8, S9, S10) and the chair will move to those positions.
2.
Getting out of your chair.
Press button (S7) and raise the chair to a height
that enables you to easily stand. Release the button. Return the chair to the
seated position (S5) (chair firmly on the floor) after getting out of the chair, so
children, pets or obstructions do not get under the chair. Repeat no. 1 when
you want to sit down.
Micro Adjustments
To recline the back of the chair
, press button (S1)
and hold until the back reaches the desired position.
Then release the button.
To bring the back of the chair to an upright posi-
tion
, press button (S2) and hold until the back reach-
es the desired position. Then release the button.
To raise the foot rest and seat, press button (S3) and
hold until the foot rest reaches the desired position.
Then release the button.
To lower the foot rest and seat, press button (S4)
and hold until the footrest closes. Then release the
button.
Note: The motors are set to shut off when they
reach their fully extended or fully retracted posi-
tion if the selected button is not released. If you
should go past your desired position, select the
button to bring you back to your desired position.
You can repeat the process as often as you like.
Cradle Adjustments
1. To move the cradle (away from wall) up and out. Press (S12) and hold it
until the cradle reaches a position suitable for you, then release the button.
2. To move the cradle (towards the wall) down and in. Press (S11) and hold
it until the cradle reaches a position suitable for you, then release the button.
S7
S9
S6 S8
S5 S10
S2
SP
S3
S1
S4
S11 S12
S13 S14
S15 S16