background image

 

11 

                                                    

 II. SAFETY 

 

MEDICATION 

Always check with your physician to determine if any of the medications you are taking 
may affect your judgment and/or your ability to operate your LiteRider. Also check with 
your physician concerning your physical ability to operate a scooter. 

 

Do not connect or allow anyone except an authorized Golden           

Technologies, Inc. provider to connect any electrical or mechanical device to your 
LiteRider. Unauthorized accessories will void the warranty and may cause injury.

 

 

 Please remember that while on your Golden LiteRider, you are a motorized  

pedestrian. You must observe and obey all pedestrian rules and regulations for the locale 
in which you are riding. 
 
Please use your Golden LiteRider™ scooter often and allow it to expand the horizons of 

your daily life. The more mobility your Golden LiteRider brings to you, the happier you 
will be, and the more satisfied we at Golden Technologies, Inc. will be! But as with all 
things, especially motor operated vehicles, observing a few rules and safety 

 

 

 

 

 

 

 

 

 

 

 

considerations will help ensure safe scooter operation. So please follow the rules below.  

 

RULES FOR USE AND OTHER SAFETY CONSIDERATIONS 

 

Read  completely  and  understand  this  owner's  manual  before           

assembling, operating, transporting, or disassembling your Golden LiteRider. 

 

• 

Always 

operate your Golden LiteRider with thought, care, and safety. 

• 

Do not

 attempt to use your LiteRider on an escalator. Always use an elevator. 

• 

Do not

 carry passengers under any circumstances. 

• 

Do not

 mount or dismount your Golden LiteRider unless the brake is engaged. 

• 

Always 

make sure that the key switch is set to "Off" before mounting or dismounting 

your scooter. 
• 

Do not

 back your Golden LiteRider down an incline or across an uneven surface. 

• 

Do not

 turn your scooter suddenly at full speed. 

• 

Always

 make sure the seat is locked forward before operating your LiteRider. 

• 

Always

 come to a full stop before changing direction from forward to reverse or from 

reverse to forward. 
• 

Do not

 operate your LiteRider where you could not safely or legally walk. 

• 

Do not

 climb ramps or curbs that exceed your scooter's capacity. 

• 

Always

 approach curbs and inclines straight on. 

• 

Always 

be aware of and careful near mechanical pinch points especially when  

assembling and disassembling your scooter. 
• 

Never 

sit on your LiteRider when it is being transported. 

• 

Always 

fasten down your LiteRider securely with an approved tie-down system while 

transporting your scooter. 
• 

Never

 operate your vehicle if it is not functioning properly.

 

Summary of Contents for LiteRider GL111











































Reviews: