manualshive.com logo in svg

Golden Compass HD GP620CC, Owner'S Manual

Share
Download
Golden Compass HD GP620CC Owner'S Manual Download Page 4

Compass HD Owner’s Manual – Models GP620 SS, GP620 CC                                                                                                                            Revised 10/27/14 

 

5

SAFETY  

 
Your 

Compass HD

™ 

is a battery-operated personal mobility vehicle. Please exercise 

caution and consideration when you are operating it. Driving your 

Compass HD

™

 

carefully and thoughtfully will help ensure your personal safety and the safety of other 

people. 

                

MANDATORY! Read and follow the owner’s manual before operating your 

            power chair. 

 

NOTE: 

Before learning to operate your 

Compass HD

™

, have your Golden Technologies, 

Inc. representative determine if it is advisable for you to practice getting on and off your 

Compass HD

™

 

and operating it in the presence of an attendant. 

  

BEFORE GETTING ON YOUR 

Compass HD

™

 

 

 

 

Check to be certain that the power is turned off. See “Operation” on pages 22-27.  
This will eliminate the possibility of accidentally activating the joystick and causing 
injury to yourself or to others.  

  Check to be certain that your 

Compass HD

™

 

is not in freewheel mode. See the 

“Operation” section on pages 22-27.   

 

Flip up the armrests.  

 

If your chair is equipped with leg rests, move them to the sides.  

 

If your chair is equipped with a footrest, flip it to the “up” position.  

 

GETTING ON YOUR 

Compass HD

™

 

 

While being careful not to entangle yourself in the leg rests or the footrest, seat 
yourself comfortably and securely on the seat. 

 

Adjust the leg rests or flip down the footrest.  

 

Flip down or replace the armrests.  

 

Fasten the lap belt, if your chair is so equipped. 

 

GETTING OFF YOUR 

Compass HD

™

 

 

 

Make certain that the power is turned off. 

 

Unfasten the lap belt, if your chair is so equipped. 

 

Flip up the armrests. 

 

Flip up the footrest, or move the leg rests to the sides. 

 

While being careful not to entangle yourself in the leg rests or the footrest, carefully 
stand and step away from the chair.  

 

MAXIMUM WEIGHT 

 

Your 

Compass HD

™

 

has been rated to a maximum payload (passenger and anything 

else being carried on the 

Compass HD

™

)

 

of 

450

 pounds. Exceeding the maximum 

weight rating will void the warranty. 

 

Exceeding the maximum weight capacity will void your 

warranty and may result in injury to yourself and/or others.

 

Summary of Contents for Compass HD GP620CC

































Reviews:

No comments

Brands by name

Popular brands

Load more brands