background image

17 

 

 

Make certain that the power to your 

Compass HD

 is turned 

off before making any adjustments, to eliminate the risk of the joystick being     
accidentally bumped and activating the power chair. 
 

 

 If you do not feel capable of safely making these adjustments, please  

contact your local Golden representative. 
 

Seat height adjustment 

The seat frame is a 4-post design that is adjustable in height and seating angle.          
Adjustment is made by removing ball detent pins, raising or lowering seat posts to       

desired height/angle and re-installing the ball detent pins. 
 
 
 

 
 
 
 

 
 

 

 
 

 

 

 

*Front/Rear height difference can be 3 inches. 

COMFORT SETTINGS  

 

You may be spending a great deal of time on your 

Compass HD

™. To provide you with 

the maximum seating comfort, Golden Technologies, Inc. has designed this power chair 
to incorporate the following adjustments for operator comfort. 

 

COMFORT SETTINGS

 

1. Seat height     
2. Headrest height  

3. Backrest angle 
4. Footrest angle 

5. Footrest height 
6. Extending the footrest 

7.  Armrest angle 
8.  Armrest height 

9. Joystick bracket length 
10. Armrest width

 

Summary of Contents for Compass HD GP620 CC








































Reviews: