Golden Technologies GP162 Owner'S Manual Download Page 2

Page: 2 / 38

Thank you for purchasing your

LiteRider Envy

. We are honored you have chosen

Golden Technologies for your mobility needs.

LiteRider Envy

(Model GP162)

Standard Packing List:

1 Owner’s Manual

Base with Under-the-Seat Basket

1 Battery Pack

1 Seat

2 Seat Arms

1 Safety Flag

1 Joystick Control

1 Battery Charger

Seat Post Nut and Bolt

FOR YOUR RECORDS

Please fill in your

LiteRider Envy

information below. This information will be useful in the

event that you ever need to contact Golden Technologies, Inc. concerning your power
chair.

Your

LiteRider Envy

Model ____________________ Serial Number ____________________________________________

Date of Purchase ________________________ Body Color _________________________________

Options ______________________________________________________________________________

Your Golden representative or provider

Name ________________________________________________________________________________

Company ____________________________________________________________________________

Address ______________________________________________________________________________

Please remember to fill in and return your warranty registration card.

Tools Required:

The following tools will allow you to make all comfort adjustments to your power chair.

DISCLAIMER

We ask that you read this manual completely before operating your new

LiteRider Envy

. Golden Technologies, Inc. is not and cannot be held responsible for any

damage or injury incurred due to improper or unsafe use of the

Golden

LiteRider Envy

Golden Technologies, Inc. specifically disclaims responsibility for any bodily injury or

property damage that may occur during any use that does not comply with applicable
federal, state, or local laws or ordinances.



Socket/Wrenches - 17mm, 14mm, 10mm, and 8mm



Allen Wrenches – 8mm, 5mm, and 4mm

Summary of Contents for GP162







































Search results

Summary of Contents for GP162

Reviews:

Related manuals for GP162

Brands by name

Popular brands

Golden Technologies GP162, Owner'S Manual

Search results

Summary of Contents for GP162

Reviews:

Related manuals for GP162

Brands by name

Popular brands