background image

Golden Mask One - User Guide

GMD - 

www.goldenmaskdetectors.com - Golden Mask Official Distributor

6

Golden Mask One - User Guide

GMD - 

www.goldenmaskdetectors.com - Golden Mask Official Distributor

7

Turning on and off the detector

To turn on the detector, hold the ON/OFF button for 2 seconds - a world map graphic 

and the Golden Mask logo will appear on the screen. From this stage to operation stage 

around 10 seconds are required for the detector software to load.

WARNING!

THIS PART IS VERY IMPORTANT,

READ IT CAREFULLY!

When you turn on the detector, the coil must be at 

least 50 cm (20”) high from the ground, and far from 

any metal objects. After the software loads, the detec-

tor performs a RESET of the electronics to pair the detector with the coil, according to 

the surrounding temperature and electromagnetic fields (if any). 

You can manually do a 

reset at any time by pressing the ENTER button. 

If the surrounding temperature is changing quickly, the detector may become nervous. In 

this case you should perform a reset prior of making any other changes, the reset resolves 

the problem in 99% of the occasions.

To turn off the detector, press and hold the ON/OFF button. A screen with HOLD TO TURN 

OFF will appear.

Hold the ON/OFF button until a POWER OFF screen appears and then release the button - 

the detector will turn off after a second.

RESET

HOLD

TO TURN OFF

POWER OFF

Summary of Contents for One 15










Reviews: