USER
’S MANUAL
22
After pressing the green function key, you can edit the selected transponder
’s detailed
information such as frequency, symbol rate and polarization. When finished, press OK key to
exit the editing state.
6.1.4 Motor Setting
Through the Motor Setting page, you can control the polar axis motor to adjust the direction of
antenna so as to make the antenna accurately point to the satellite. There are these setting
items in this page
Satellite:
Select a satellite.
Transponder:
Select a transponder
Motor setting:
Set the polar axis motor. (DiSEqC 1.2, USALS, Disable)
If you have already selected a satellite and a transponder, when moving the polar axis, you
will find the signal strength and quality indicators at the bottom of the page.
6.1.5 Limit Setup
There are three sub items:
Limit Setup:
Polar axis move limit setting.
Continuing Move:
Enable polar axis continuous move.
Move Step:
Enable polar axis step move. After setting, you can press LEFT/RIGHT
keys to move the polar axis east or west step by step.
6.2 Channel
The Channel menu has four items: Channel Manager, Favorite List, Channel Setup and
Delete All Channel. To enter the Channel menu, press UP/DOWN keys in the Main Menu to
highlight the Channel item and then press OK or RIGHT keys. The Channel menu is shown
as below:
6.2.1 Channel Manager
The system provides powerful channel management function. You can through the Channel
Manager menu to manage your channels such as deleting, locking, sorting, skipping or
renaming.
To enter the Channel Manager menu, in the Channel menu press UP/DOWN keys to select
the Channel Manager item and then press
OK key. See the figure below:
