10
Bench Heating Board
FIG 8.1 Connect Floor Heater
10.
Slide the Bench Heater Panel down (vertically) into the slot at an angle and pull it forward as seen
in FIG 9. Connect the Bench Heater Panel cord with the cord coming from the Rear Wall Panel.
Next, place the Bench on top of the Bench Heater Panel and slide it into place all the way back
against the Rear Wall Panel
.
See FIG 9, 9a & 10
Note: Make sure the cords are connected snug
and tight, otherwise the heaters will not work.
FIG 9
Installing Bench
FIG 9
Connecting Cord
FIG-10
Installing Bench
11.
Align the Front Panel up against the Floor Panel. Remember, this side of the Floor Panel has
no
Stain finish. Next, latch the Front Panel with the Left and Right Side Panels respectively.
Note:
Be cautious with the glass door to avoid breakage. See FIG 11.
Floor Heater
Floor Heater Wire