EN
18
Safe operation is ensured only in the conditions of use in accordance with its intended
purpose.
Any work related to the installation, maintenance or repair of the device must be
carried out by a qualified service technician.
3. DEVICE INSTALLATION AND MAINTENANCE
Proper connection of the device to an adequate socket with earthing is the foundation
for proper work. In the case of inappropriate installation, the machine may cause injury.
•
The cable must not come into contact with sources of heat and sharp edges. The
cable must not sag and cannot be immersed in water.
•
Do not use malfunctioning or damaged devices.
•
Parts or accessories not recommended by the manufacturer cannot be used in
the device. The act of using parts not recommended by the manufacturer results
in loss of warranty and can lead to a direct threat to the life or health of the user.
•
It is forbidden to move, adjust and rotate the device during operation.
•
Remove all packaging materials before use.
•
The device should be placed on a flat, stable surface which can support its weight.
•
It is forbidden to place the device on a combustible surface.
•
It is forbidden to place the device near an open flame, electric stoves, coal stoves
or other heat sources, as well as near direct sunlight.
•
The device should be placed to ensure good air circulation. A minimum distance of
20 cm to the rear wall, 15 cm to the sides and 35 cm upwards must be maintained.
•
It is forbidden to place the device in areas with high humidity.
•
The device must not be connected to outlets other than wall-mounted sockets, do
not use a multiple outlet adapter or multiple sockets.
4. GENERAL SAFETY GUIDELINES FOR OPERATION OF VACUUM
DRYERS:
Regularly inspect the condition of the doors and safety windows for scratches or other
damage. In the case of finding any damages on the doors or windows, do not generate
vacuum in the device. This also applies to the other functional elements of the device
– pipe connectors, switches, etc.
Do not put the vacuum dryer on a flammable ground!
It is important for the vacuum dryer to be precisely vertical. The distance between the
back of the dryer and the wall should be at least 20 cm. The distance between the top
of the device and the ceiling should be at least 35 cm, whereas the minimum distance
between the sides of the device and the walls should be at least 15 cm on each side.
Summary of Contents for Goldbrunn 1450
