![background image](http://html1.mh-extra.com/html/goldair/platinum-gpph220/platinum-gpph220_manual_2240285011.webp)
WiFi
–
Downloading and Setting up APP
•
Enter the verification code from your text message
•
Create a password.
•
Then tap confirm.
If you haven’t received a verification code via text
message. Tap the resend button and when the
verification code is received follow above steps.
Your APP is now registered and ready for pairing to your
heater.
Pairing APP to Heater
Turn the main power switch which is on the right hand side of the appliance at the back to turn the heater on. The
heater will beep once and will be stand by mode.
Press the Power button (4) on the heater. A beep will sound indicating the heater is now on and the current
temperature will be displayed on the screen.
The power indicator light will start flashing to indicate the WiFi is in pairing mode.
To reset the WiFi press and hold the high heat setting (5) for 5 seconds. When active the power light will flash.
1
5
6
8
2
3
7
4