Installing your Appliance
NOTE:
Before using this appliance, it must be ceiling mounted. The screw
pack to mount the appliance to the wall will be available in the box.
NOTE:
Your Goldair Ceiling Fan should be installed with at least 2.1m
clearance from the floor and 1.5m from the wall to the blade.
WARNING:
If unusual oscillating movement is observed, immediately
stop using the ceiling fan and contact the manufacturer, its service agent or
suitably qualified persons
CEILING FANS ARE ONLY TO BE MOUNTED ON WALLS THAT COMPLY
WITH CURRENT AS/NZS SPECIFICATIONS & BUILDING REGULATIONS.
Safety Precautions
1.
Installation must be carried out by a qualified installer.
2.
Turn off power before assembly & disassembly.
3.
Ensure that all screws are tight throughout the course of installation.
4.
Ensure that blades are not obstructed by other objects and are able to turn freely.
5.
The electrical supply must include an isolation switch providing at least 3mm
contact separation on all live conductors.
6.
Do not connect the ceiling fan to any dimmer switch or regulator.
7.
Do not place any objects in the path of the blades
8.
Do not install near any of the below:
1.
Flammable areas such as a gas cooker
2.
Oily Areas
3.
Wet and high humidity areas such as a bathroom
4.
Areas that are continuously exposed to the wind
Summary of Contents for PLATINUM GPCF300B
