background image

Operating Your Appliance

Always choose a safe location for the dehumidifier, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit before use.
Please follow the below instructions.

WARNING:

In order to avoid overheating or fire, do not cover the

dehumidifier.

WARNING:

Keep all objects at least 20cm away from all the sides of the

appliance.

WARNING:

Do not use this dehumidifier with a programmer, separate

timer, remote-control system or any other device that switches the
dehumidifier on automatically, since a fire risk exists if the dehumidifier is
covered or positioned incorrectly.

WARNING:

Never leave this dehumidifier unattended.

Ensure the dehumidifier is on a flat, stable, heat-resistant surface.

Once the dehumidifier is in a safe operating position and all switches are in the off
position, insert the power plug into the mains outlet. This dehumidifier is designed to
be used indoors in residential / small office spaces only.

On first use, run the dehumidifier continuously for 24 hours.

CAUTION:

Ensure the power cord is not tight because if pulled it may

partially pull the plug from the socket. A partially inserted plug will overheat
the plug and socket and could result in fire.

DEHUMIDIFIER CONTROL PANEL

Summary of Contents for PLATINUM DrySmart GPDH440

























Reviews: