Operating your Fan Heater
SAFETY DEVICE
This appliance has three protection devices:
The first device will automatically turn the appliance
off if the appliance is not in the appropriate operating
position.
The second device automatically disconnects &
reconnects the appliance at a pre-set temperature.
The
third
device
disconnects
the
appliance
permanently in case of overheating, by means of a
thermal fuse (it is non resettable).
IMPORTANT! NEVER COVER THIS HEATER!
CARE AND CLEANING
The heater requires regular cleaning to ensure
trouble free operation:
Unplug the heater from the mains supply before
cleaning.
Ensure that the heater has been allowed to cool
down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of
the heater to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff from
around the grills.
Never use solutions such as benzene, thinners or
polishing agents.
Ensure the heater is dry before plugging back into
the mains supply.
Do not attempt to dismantle the Fan Heater. There
are no user serviceable parts. For service or repair,
contact an authorised electrical service technician.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase. (Refer to back of booklet).
WARNING Keep all objects at least 1 metre
from the
front,
sides and
rear
of
the
appliance.
HEAT CONTROL SWITCH
The control switch positions are:
“0” = OFF
= Fan Only
“I” = Low Heat
“II” = High Heat
Check that the heat control switch is set to Off
position before plugging the heater into the
mains supply. For greater economy, use the
High Heat setting initially and then switch to the
Low Heat setting.
For the Low and High Heat settings the fan
remains at the same speed; only the element
changes to create the greater/lesser heat output.
THERMOSTAT
Turn the thermostat knob clockwise until you
reach
the
maximum
temperature
on
the
graduated scale.
When the desired room
temperature is reached, slowly turn the knob
anti-clockwise until the heater turns off (you will
hear a click). The heater will now cycle on and
off to maintain the set temperature.
CAUTION
The Fan Heater generates heat during use.
Proper precautions must be taken to prevent the
risk
of
burns, scalds, fires or other damage to
persons
.
Do not use this heater with a programmer, timer,
separate remote-control system or any other
device that switches the heater on automatically.
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the
unit before use. This appliance requires no installation, it should be used
solely as a portable appliance.
Goldair Select
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair Select
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
