background image

Your  Goldair  product  has  been  inspected, 
tested  and  is  guaranteed  subject  to  the 
following  for  a  period  to  one  year  from  the 
date 

of 

purchase 

against 

defects 

in 

workmanship  and  materials.  During  this 
period,  such  defects  will  be  rectified  by  repair 
or  replacement  of  the  product  purchased. 
Your  Warranty  becomes  invalid  if  in  our 
opinion  the  product  has  been  misused, 
incorrectly 

assembled, 

tampered 

with, 

connected  to  a  gas  supply  not  corresponding 
with  the  name  plate  specification,  or  not 
regularly maintained as per the 

“Maintenance” 

notes  at  the  end  of  this  user  manual.  The 
Warranty does not include any labour or other 
associated  expense  that  may  be  involved  in 
removal  or  installation  of  the  product.  Normal 
wear  &  tear  and  any  issues  involving 
spider/insect  web  build 

up’s  inside  gas  lines 

are expressly excluded.  
 
If  your  Goldair  product  fails  to  operate 
satisfactorily, please contact Goldair via phone 
in  the  first  instance.  To  obtain  a  repair  or 
replacement product under this Warranty, you 
will  need  to  produce  satisfactory  evidence  of 
date  of  purchase.  The  completed  Warranty 
and  purchase  receipt  must  be  presented  with 
the product. The Warranty should be filled out 
at the time of purchase. It is in your interest to 
make sure this is done.  
 
 
 

If  the  product  is  to  be  replaced  (cannot  be 
repaired)  then  that  replacement  will  be  of  the 
same  or  similar  product  or  accessory 
excluding  packaging,  instruction  card  etc. 
Where a replacement product is supplied, this 
shall  be  guaranteed  for  the  balance  of  the 
original Warranty period. 
 
Any  model  that  is  no  longer  available  will  be 
replaced by a model of a value and  with such 
features  as  we  consider  appropriate  in  the 
circumstances.  Goldair  Ltd  is  not  responsible 
for  freight  forwarding  charges,  losses  or 
damage in transit. 
 
If service is required after the Warranty period 
has  expired,  the  product  should  be  inspected 
by  a  qualified  gas  service  technician.  Service 
outside  of  the  Warranty  period  will  be  at  your 
cost. 
 
Consumers Guarantee Act (1993). 
In  accordance  with  the  above  act,  consumers 
are  advised  that:  The  manufacturer  does  not 
undertake  that  repair  facilities  and  parts  are 
necessarily available for this product. 
If  any  of  the  provisions  of  the  foregoing  are 
contrary  to  any  relevant  legislation,  then  that 
provision shall be deemed to be excluded from 
the Warranty and the rest of the provisions will 
continue to apply. 
 

Name ……………………………………………… 

Address …………………………………………… 

………………………………………………………. 

Suburb …………………………………………… 

Purchased from ………………………………… 

Date of purchase ………………………………… 

Name of product ………………………………… 

Model no ……………………………………………

 

  

IMPORTANT: Please retain this Warranty card 

One Year Warranty 

Summary of Contents for GPF42














Reviews: