ASSEMBLY OF GOC155 & GOC157
Carefully turn the heater upside-down on a non-scratching and stable surface to prevent damage to
the paint finish or your floor surfacing (Figure 1).
Fit the wheel castors onto the heater by placing the U-shaped bolt between the outermost fin away
from the control side of the heater (Figure 2, 3).
Securely fasten the wheel castors to the heater by screwing the wing nuts onto the U-bolts (Figure 4).
Attach the second wheel castor at the bottom of the control panel, then securely fasten the wheel
castor onto the heater with the two screws (Figure 5).
IMPORTANT: Please fit the wheel assemblies as per the diagram. Any other position may affect the
stability of the heater.
WARNING: Operate the Main Body in normal upright position only with wheel assemblies attached to
the bottom, any other position could create a hazardous situation.
ASSEMBLY FOR GOC155 & GOC157
Main Body x1
Wing Nut x1
U-shape Bolt x1
Screw x2
Wheel Castor x2
