Goldair GOC1211, Operating Instructions Manual

Page: 8 / 12

Operating Your Heater
HEATER CONTROL SWITCH
The control switch positions are:
O
Off
●
Minimum heating
●●
Medium heating
●●●
Maximum heating
THERMOSTATIC CONTROL
1. Rotate thermostat knob clockwise until you
reach the maximum position.
2. When the room reaches a temperature that is
comfortable for you, slowly turn the knob anti-
clockwise until the heater just turns off (you will
hear a click).
3. The heater will now cycle on and off to maintain
the comfort level you have set.
4. Take note of this setting position for future use.
WARNING:
In order to avoid overheating or fire, do not cover the heater.
WARNING:
Keep all objects at least 1 metre from the front, sides and rear of
the appliance.
WARNING:
Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING:
Never leave this heater unattended when in use.
Ensure heater is on a flat, stable, heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the off
position, insert the power plug into the mains outlet and switch on.
CAUTION:
Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will overheat the
plug and socket and could result in fire.
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use.
Please follow the below instructions.