Care and cleaning
CARE
Never continue to operate the Stand Mixer
if an object such as a spoon or spatula or
other item falls into the bowl.
IMMEDIATELY turn speed dial to OFF,
turn the Stand Mixer off, unplug at power
and remove the object.
DO NOT
continuously operate the Stand
Mixer for more than 2 minutes if you have
a heavy load in the bowl.
DO NOT
overload the Stand Mixer.
CLEANING
Before cleaning,
unplug your Stand Mixer
and make sure it cools down.
For the power unit
: Wipe with a damp
cloth and dry. Never use abrasive
cleaners. NEVER immerse in water.
Tools:
Hand wash only. DO NOT place in
dishwasher. Dry thoroughly.
STAINLESS STEEL BOWL
The bowl for your Goldair mixer is
made from stainless steel. While it is
very durable, stainless steel does
require care to maintain its good looks.
Please read the notes below:
Before first use:
hand wash, rinse and
thoroughly dry your stainless steel bowl to
remove any manufacturing residue.
After every use:
hand wash, rinse and
thoroughly dry. Leave standing upright for
a period to allow any water trapped in base
of bowl to drain out or dry.
Periodically:
use a powdered cleaner or
polisher for stainless steel. Follow the
“grain” of the stainless steel.
Do not use steel wool, a wire brush, bleach
or abrasive cleaners. Steel wool can leave
particles of steel on the bowl, and these
can cause rust marks.
Do not use the stainless steel bowl in
microwave, oven or on a direct heat
source.
Do not place the stainless steel bowl in the
dishwasher.
Metal utensils may scratch the surface of
the stainless steel bowl; this is quite
normal and occurs with all stainless steel.
“Hard” water can cause a discolouration on
stainless steel.
If your stainless steel bowl becomes dull
looking, you may refresh it by sprinkling it
with baking soda while the bowl’s surface
is wet. Gently rub the bowl, then rinse and
thoroughly dry.
Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE