WALL-MOUNTING FITTING (USED AS FIXED APPLIANCE)
Fitting accessories should be mounted on the wall by screws provided. They should be a distance of 100-
150 mm away from the floor. It is important to mount the radiator horizontally.
Wall mounting assembly method:
(1) Drill holes on the wall with a distance specified on the figure.
(2) Press the plastic expanded screws into holes and then fixing the brackets on the wall by screwing them
into the holes.
(3) Slide the brackets provided into the Mica heater.
(4) Place the security countercheck on the center of the warmer’s top and fixed it for safety.
CAUTION: never install the radiator directly beneath a socket-outlet or in such a way that people in the
baths, showers or pools may have to touch live parts such as a switch.
Important: The radiator must be connected to an earthed outlet of the appropriate voltage.
IMPORTANT
• Please operate the heater only at the voltage that appears on the label. (220-240V~50Hz 1800W)
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified technician in order to avoid a hazard.
• The product is for household use only.
• The heater must not be located immediately below a socket-outlet.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
• Do not use this heater in the immediate surroundings of a bath, shower or swimming pool.
• Do not cover the heater – It is not to be used for drying clothes or textiles by placing them directly over its
surface
.
