OVERVIEW OF YOUR RADIANT HEATER
Your Goldair radiant heater is equipped with three heat settings to ensure your precise heating needs
are met.
ASSEMBLING YOUR HEATER
The heater comes with 2 wheel plates and castors that need to be fitted to the heater before using.
These wheel plates and castors are located in the base of the heater. Remove them from their storage
location and attach them to the base of the heater using the mounting screws that are already screwed
into the base.
OPERATING YOUR HEATER
Always choose a safe location for the heater (For safety reasons keep the heater 1 metre from other
objects
– i.e. walls, curtains, furniture, etc.) keeping in mind the safety precautions outlined. Ensure that
all packaging has been removed from the unit before use.
SELECTING YOUR DESIRED HEAT SETTING
•LOW Heat - Press down switch “I”.
•MEDIMUM Heat - Press down the “I” & “II” switches
•HIGH Heat - Press down switches “I”, “II” and “III”
IMPORTANT! ~ NEVER COVER THIS HEATER!
WARNING: The heater must not be used if the glass tubes are damaged
Do not use this heater with a programmer, timer, separate remote-control
system or any other device that switches the heater on automatically, since a
fire risk exists if the heater is covered or positioned incorrectly.
