OVERVIEW OF YOUR GOLDAIR RADIANT HEATER
Your Goldair Radiant Heater is designed to provide direct personal heating. The heater is equipped with two
heat settings to ensure your precise heating needs are met. An additional tip over safety device is built into
the product for added security.
OPERATING YOUR HEATER
Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all
packaging has been removed from the unit before use.
HEAT CONTROL SWITCH
The control switch positions are:
• “0” = OFF
• “I” = Low Heat
• “II” = High Heat
Check that the heat control switch is set to the Off position before plugging the heater into the mains supply.
For greater economy, use the High heat setting initially and then switch to Low heat setting.
RADIANT HEATER SPECIFICATION
Model No: GIR250
Power Supply: 220-240V, 50Hz AC only
Power: 900-1000W
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday
– Friday 8am-5pm
Phone: 0800 232 633
Website: www.goldair.co.nz
SAFETY DEVICE
~ This appliance has two protection devices:
The first device, automatically disconnects & reconnects the appliance at a preset temperature,
The second safety device disconnects the appliance permanently in case of overheating, by means of a
thermal fuse. (It is non resettable)
IMPORTANT! ~ NEVER COVER THIS HEATER!
Covering the heater will cause activation of the non resettable safety fuse.