For models: GIR250
1000W RADIANT HEATER
OPERATING INSTRUCTIONS
Page 1: ...For models GIR250 1000W RADIANT HEATER OPERATING INSTRUCTIONS ...
Page 2: ...off 16 Do not remove plug from power socket by pulling cord always grip plug 17 Always unplug appliance when not in use 18 Do not locate the heater directly below any power socket during operation 19 Do not twist kink or wrap the cord around the appliance as this may cause the insulation to weaken and split Always ensure that all cord has been removed from any cord storage area and is unrolled bef...
Page 3: ...er into the mains supply For greater economy use the High heat setting initially and then switch to Low heat setting RADIANT HEATER SPECIFICATION Model No GIR250 Power Supply 220 240V 50Hz AC only Power 900 1000W PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase Refer to back of booklet SUPPORT AND TECHNICAL ADVICE North Shore City Auckland New Zealand Monday Friday 8am 5pm...
Page 4: ...the time of purchase It is in your interest to make sure this is done If the product is to be replaced cannot be repaired then that replacement will be of the same or similar product or accessory excluding packaging instruction card etc Where a replacement product is supplied this shall be guaranteed for the balance of the original warranty period Any model that is no longer available will be repl...
