Overview of your Heat Pump
REMOTE
For best results, aim the remote directly at the
remote sensor on the control panel.
The remote has a 5 metre range of operation.
The remote control requires 2x AAA batteries
(included). Remove the plastic tab from the rear
of the remote to install batteries.
1.
Temperature increase
2.
Temperature decrease
3.
Mode
4.
Swing
5.
Reset
6.
Air Direction (oscillating louvre)
7.
LED display
8.
Fan speed
9.
Power on/off
10. Timer on
11. Sleep
12. Timer off
13. Lock
14. Turbo
MEMORY FUNCTION
If power supply is cut off when the appliance is
running, or when the unit is powered off, it will
automatically restart in the last working mode
once power is restored.
REMOTE CONTROL PANEL
The control panel on the Remote indicates the
Heat Pump mode and function.
1.
Temperature indicator
2.
Transmitting indicator (blinks
when the remote transmits to
the indoor unit control panel)
3.
Power on/off indicator
4.
Operation mode indicator
5.
Lock indicator
6.
Timer indicator
7.
Fan speed indicator
NOTE: You will hear a beep each time a
remote
control
button
is
pressed,
as
it
transmits to the indoor unit control panel.
Goldair heat pumps are covered under warranty only when a Goldair
Approved Installer has completed the install, any heat pump not installed
by a Goldair Approved Installer will void its warranty.
(°C)