Goldair GETH230, General Care And Safety Manual

Page: 6 / 12

OPERATING INSTRUCTIONS
1. You can program your Electric Throw to work for 1-9 or 12
hours and with 1-9 heat settings
2. Plug into the mains power supply and switch on the power
mains
3. Switch on the Electric Throw with
“
On/Off
”
button. The
Throw will come at a default setting of 0 heat and 1 Hour
timer.
4. The LED for timer and temperature will be illuminated.
5. By pressing the Temp button you will be able to adjust the
heat settings from 1
– 9. 1 being lowest and 9 being highest.
This will be indicated with the left LED.
6. You can also set the timer to turn the Electric Throw off
after a predetermined time being 1-9 hour or 12 hours. By
pressing the Timer button you will be able to adjust the
number of hours from 1-9 (press once for each hour),
pressing one more time will show
“H” illuminated on the
heat controller which indicates the timer is set to 12 hours.
This will be indicated with the right LED.
NOTE: When using on the Electric Throw some people may
experience a tingling sensation whether alone or when
touching someone else using the Electric Throw.
This
“tingling sensation” is known as an electric field effect
and caused by the current flowing through the elements
creating an Electromagnetic Field (EMF). Some people may
be more sensitive to feeling the EMF tingling sensation than
others. It is known to occur across all makes and models.
This is no cause for concern and is in no way an electric
shock.
LED Readout
Timer Button
On/Off Switch
Temperature
Button
Operating Your Electric Fleece Throw
HEAT CONTROLLER
The control features an on/off switch and two buttons to control the heat settings and the
timer.
It also has an LED readout for temperature and timer settings.