Overview of Goldair Electric Throw
9 HEAT CONTROL
The control features an on/off switch and two buttons to control the heat settings and the timer.
It also has an LED readout for temperature and timer settings.
Your Goldair Electric Throw is equipped with a 9 heat control.
OPERATING INSTRUCTIONS
1. You can program your Throw to work for 1-9 &
12 hours and 1-9 heat settings
2. Plug into the mains power supply and switch on
the power mains
3. Switch on the Throw with
“
On/Off
”
button.
4. The LED for timer and temp will be illuminated.
5. By pressing the Temp button you will be able to
adjust the heat settings from 1
–9. 1 being lowest
and 9 being highest. This will be indicated with the
left LED.
6. You can also set the timer to turn the Throw off
after a predetermined time being 1-9 hour or 12
hours. The LED will show
“H” when the timer is set
to 12 hours. This will be indicated with the right
LED.
LED Readout
Timer Button
On/Off Switch
BEFORE FIRST USE
Before using your Electric Throw for the first time;
The Throw needs to be unfolded and laid flat before
switching on.
we recommend that you switch your Throw to the
maximum setting for two to three hours before
bedtime then reduce to your desired heat setting
when sleeping.
EVERYDAY USE
With normal use your Electric Throw will require 15
minutes of preheating on the maximum setting
before bedtime. We recommend that you turn the
Throw down to Low or off when sleeping.
STORING YOUR THROW
Always allow the Throw to cool before storing.
Remove the control and roll or fold the Throw
loosely and store it in a bag or the bag it was
supplied in. Avoid pressing sharp creases into the
Throw.
Temperature
Button
