Goldair GEFT200, Operating Manual

Page: 4 / 8

Overview of Goldair Electric Throw
Your Goldair Electric Throw is equipped with a 9 heat controller.
Important instructions: Retain for future use.
OPERATING INSTRUCTIONS
1. You can program your Electric Throw to work
for 1-9 or 12 hours and with 1-9 heat settings
2. Plug into the mains power supply and switch
on the power mains
3. Switch on the Electric Throw with
“
On/Off
”
button. The Throw will come at a default setting of
0 heat and 1 Hour timer.
4. The LED for timer and temperature will be
illuminated.
5. By pressing the Temp button you will be able to
adjust the heat settings from 1
–9. 1 being lowest
and 9 being highest. This will be indicated with
the left LED.
6. You can also set the timer to turn the Electric
Throw off after a predetermined time being 1-9
hour or 12 hours. By pressing the Timer button
you will be able to adjust the number of hours
from 1-9 (press once for each hour), pressing one
more time will show
“H” illuminated on the heat
controller which indicates the timer is set to 12
hours. This will be indicated with the right LED.
NOTE: Children under the age of 3 are not to use
this appliance due to their inability to react to
heat.
NOTE: This appliance is not to be used by young
children over the age of 3 unless the controls
have been pre-set by a parent or guardian, or
unless the child has been adequately instructed
on how to operate the controls safely.
NOTE: When using on the Electric Throw some
people may experience a tingling sensation
whether alone or when touching someone else
using the Electric Throw.
This
“tingling sensation” is known as an electric
field effect and caused by the current flowing
through the elements creating an Electromagnetic
Field (EMF). Some people may be more sensitive
to feeling the EMF tingling sensation than others.
It is known to occur across all makes and models.
This is no cause for concern and is in no way an
electric shock.
LED Readout
Timer Button
On/Off Switch
Temperature
Button
Important instructions: Retain for future use.
HEAT CONTROLLER
The control features an on/off switch and two
buttons to control the heat settings and the
timer.
It also has an LED readout for temperature and
timer settings.
Not to be used by
very young children
(0-3 years)
BEFORE FIRST USE
NOTE: This is electric throw is to only be used
as an over blanket
Before using your Electric Throw for the first time:
1) The Electric Throw needs to be unfolded
and laid flat before switching on.
2) We recommend that you switch your Electric
Throw to the maximum setting for two to
three hours before bedtime then reduce to
your desired heat setting 15 minutes before
getting into bed,
you must switch OFF
prior to sleeping.
EVERYDAY USE
With normal use your Electric Throw will require
15 minutes of preheating before bedtime.
IMPORTANT: Your Electric Blanket is designed
to pre-heat your bed.
Never sleep with Electric
Throw turned on.
TECHNICAL SPECIFICATION
Models: GEFT200, GEFT220
Supply: 220-240VAC 50Hz
Wattage: 100W