Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
Cleaning
To avoid risk of electric shock, before
cleaning, you MUST ALWAYS switch off
and unplug the Fan before cleaning.
Use only a soft, damp cloth to gently wipe
the Fan and dry well.
DO NOT immerse the Fan in water and
never allow water to enter the motor
housing.
DO NOT use harsh chemicals to clean the
Fan.
Operating your Fan
Fan control
Place the Fan on a dry, level and sturdy
surface. Plug the power cord into the socket.
Power
(A) The fan functions ON and OFF by
pressing the power button. Lights on the
fan’s
control panel indicate the power is ON.
Fan Speed
(B) The fan speed can be
adjusted by pressing the SPEED button.
Press the button to switch between the speed
settings.
Timer
(C) The fan has an automatic timer to
turn the unit OFF at intervals of 1,2,4 or 8
hours. To set the timer, turn the unit on at the
required speed, press the timer button until
the desired run time is illuminated.
The fan will turn off once the time has
expired.
Oscillation
(D) The oscillation feature can be
activated by pressing the Oscillation button.
The fan can be set to a stationary position by
pressing the button again.
