![background image](http://html1.mh-extra.com/html/goldair/gchv220/gchv220_operating-instructions-manual_2240023006.webp)
Fit rear guard of fan into motor and
secure with 4 screws. Please ensure
these screws are properly tightened
to avoid vibration noise.
Fit blade to shaft and Lock blade set
screw by ensuring the screw seats
onto the flat part of the shaft as
shown below.
Fit front guard to rear guard using
clips.
Assembly cont.
When securing cord anchorage, please ensure sufficient cord loop between
motor and cord anchorage is maintained. Insufficient loop may cause cord to
short-out when fan oscillates.
Set screw
Flat part of shaft
Summary of Contents for GCHV220
Page 1: ...Operating Instructions 75cm Industrial Wall Fan with Remote Model GCHV220 ...
Page 2: ......
Page 10: ......
Page 11: ......