Ensure that the fan is switched off from the
mains supply before removing the guard.
Empty the water reservoir by loosening the
plug of the water drainage outlet. Make sure
you have a container under the drain to
collect the water or empty the unit outside.
You may have to empty the water collector a
few times. So just re-cap the plug of the water
drainage outlet during emptying.
Using a soft, damp cloth, carefully clean the
exterior surface of the product.
Do not allow water or other liquids to run into
the interior of the product, as this could create
a fire and / or electrical hazard.
We also recommend the periodic cleaning of
this appliance by lightly running a vacuum
cleaner nozzle over the guards to remove any
dust or dirt that may have accumulated inside
or on the unit.
CAUTION:
Do not use harsh detergents,
chemical cleaners or solvents as they may
damage the surface finish of the plastic
components.
When cleaning the water tank, first drain the
water inside then remove any dirt and dust
and wipe dry.
Filter cleaning:
The filter is supplied assembled and can be
removed for cleaning as required.
It is
recommended that the filter be cleaned once
every week.
Depress the clips at the top of the protective
panel and remove from the appliance.
Remove the filter. Use a vacuum cleaner to
remove dust.
Replace the filter and reinstall the protective
panel.
Note:
Never use appliance without the air
filter.
Cleaning and Maintenance
Goldair
–
New Zealand
Monday
–
Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
–
Australia
Monday
–
Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
