General care and safety guide, continued
✘
Never operate the appliance with a
damaged cord or plug, after it malfunctions, or
if it has been damaged in any manner. Have
the appliance checked and repaired by a
qualified electrician if repair is necessary. If the
supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
✘
The Blender is not intended to be operated
by means of an external timer or separate
remote-control system. The use of an
extension cord is not recommended.
✘
Never use metal scouring pads for cleaning.
Small metal pieces can come loose and cause
short-circuiting of electrical components, which
can cause electric shock or damage the
appliance.
✘
Due to the risk of injury, the use of third
party accessories is not recommended by the
manufacturer.
✘
Never blend hot oil or fat.
✘
Never touch blades while the machine is
plugged in.
✘
Never insert objects into the blender jug
while the machine is plugged in.
✘
Do not allow children to use the blender
without supervision.
Before first use
Carefully unpack the Blender and remove all
packaging material.
Clean the various Blender accessories in warm
soapy water. Rinse and dry thoroughly before
use.
Before first use
Cleaning
To avoid risk of electric shock, before cleaning,
you MUST ALWAYS switch off and unplug the
cord from the electrical outlet.
Wipe Blender body with a damp cloth and dry
well. DO NOT immerse Blender body in water or
any other liquid.
Wash sport bottle in hot soapy water. Rinse well
and dry. Be very careful with the sharp blades.
Alternatively, partially fill Blender jug with warm
(not hot) water and a little dishwashing liquid.
Run the Blender for a short period to clean the
jug. Rinse and dry well.
DO NOT PLACE ANY OF THE BLENDER
PARTS IN A DISHWASHER.
After cleaning, reassemble blade assembly to
open end of the sport bottle and then place in
the blender base. Snap the drinking lid on the
other end of the sport bottle.
