Assembly instructions
Before beginning assembly of product
,
make sure all parts are present by
comparing parts with components list.
Before assembling make sure the power
cord is unplugged from the power outlet
and the speed control knob is in the “0”
position.
Press the Head Tilt Lever and swing the
mixer head up.
Place the Mixing Bowl on the base so that
it is sitting evenly. To fully lock the Mixing
Bowl onto the base, turn the bowl in a
clockwise direction until the bowl clicks into
position. To remove the Mixing Bowl, turn
the bowl from its locked position anti-
clockwise until the bowl dislodges rom the
base and can be lifted away.
Operating your Stand Mixer
Note:
When fitting or removing the Mixing
Bowl you must ensure the mixer head is
locked into the tilt back position and all the
attachments have been ejected.
Place the Mixing Bowl Cover in place by
rotating it clockwise to lock into position.
Place the cover AFTER placing the Mixing
Bowl
on the mixer’s base.
Insert the mixer attachments (Balloon
Whisk or Dough Hook or Flat Beater) by
fitting it into the off-center attachment point
and ensure the attachments lock into
position.
Assemble Stand Mixer as per instructions
in this manual.
Put the ingredients into the Mixing Bowl
and slightly press the Mixer Head to lower
the head
until a “click” sound indicates the
Mixer Head is securely in position.
Plug the power cord into main power outlet
and switch it ON. Use the Speed Dial to
turn the mixer “ON” and to control the
mixing
speeds, from “MIN” through 1 to 6
and “MAX”. Turn the mixer to “OFF”
position to turn off.
Refer to the “SPEED CONTROL GUIDE”
for information about what speed to use.
The mixer will stop if you tilt up the Mixer
Head during operation. Lower the Mixer
Head down to continue operation. NOTE:
you will need to reset the machine (turn to
“OFF" then back to required speed again)
if you wish to continue operation after tilting
the Mixer head up. This is a safety feature.
WARNINGS:
Unplug mixer before touching beaters
or dough hooks.
Do not scrape bowl while mixer is
operating.
The Stand Mixer may warm up during
use. Under heavy loads with extended
mixing time, you may not be able to
comfortably touch the top of the unit.
This is normal. However, when mixing
heavy loads, it is strongly
recommended that you do not operate
the Stand Mixer for more than 2
minutes.
If the motor overheats, the unit will
automatically shut off. Turn dial to off
and turn off at supply. DO NOT operate
unit until it has completely cooled
down. DO NOT attempt to remove
accessories or otherwise handle mixer
while it is in shut down mode unless
you have disconnected from power.
