1.
Do not attempt to dismantle the kettle or
power
base.
There
are
no
user
serviceable parts. For service or repair,
contact an authorised electrician.
2.
To prolong the
kettle’s life, please clean
the mineral deposits in the kettle regularly.
3.
Always unplug from the plug socket and
allow to cool down before cleaning.
4.
Do not immerse the power cord, kettle or
power base in water.
5.
Do not use chemicals, steel wool, or
abrasive cleaners to clean the outside of
the kettle as these will scratch the surface
and fade the outside color.
6.
Periodic de-scaling is required. The
interval of de-scaling depends on the
hardness of water in your area and the
frequency of using the kettle.
Cleaning/Descaling Method:
1.
Fill the kettle with 0.5L of white vinegar
and the remainder with water and allow to
stand for at least one hour.
2.
Empty the solution from the kettle. Wipe
the remaining deposits with a damp cloth.
3.
Fill the kettle with clean water, bring to boil
and then discard the water. Repeat at
least once or until no mineral deposits are
left and the kettle will be ready to use.
4.
Remove the scale filter. Wash with clean
water and dry thoroughly before replacing
in the kettle.
1.
Remove the kettle from the base to fill it.
Pull the lid up to remove lid from the kettle.
Pour water into the kettle to the desired
level (no less than MINIMUM and no more
than MAXIMUM), place the lid back on the
kettle and place the kettle back on the
base unit.
2.
Connect the plug into a power outlet, turn
the kettle on by pressing the switch.
Ensure the kettle is positioned so the spout
is facing away from you
3.
The kettle will automatically switch itself off
once the water has boiled and the red
power light goes off.
4.
Lift the kettle from the base and pour the
water into a container or cup
5.
The boiling process can be terminated at
any time by lifting the kettle off the power
base.
WARNING: DO NOT REMOVE THE LID
WHILE THE WATER IS BOILING
USE ONLY THE STAND PROVIDED WITH
THIS APPLIANCE
CAUTION: DO NOT OPERATE THE KETTLE
ON AN INCLINED PLANE
DO NOT MOVE THE KETTLE WHILE IT IS
SWITCHED ON
CAUTION: ENSURE THAT THE KETTLE IS
SWITCHED OFF BEFORE REMOVING IT
FROM ITS STAND
SUPPORT AND TECHNICAL ADVICE
PO Box 100707, NSMC, Auckland
Monday
– Friday 8am-5pm
Phone: 0800 232 633
Website: www.goldair.co.nz
Operating your Kettle
Care and cleaning
