Goldacres FIRE FIGHTING 450L Operator'S & Parts Manual Download Page 9

9

Goldacres Warranty Statement

This warranty is the only warranty applicable to 

Goldacres new products (Products) and to the 

maximum extent as permitted by law, is expressly 

in lieu of any other conditions or warranties 

expressed or implied in relation to the Product.
In Australia, Goldacres Products come with 

guarantees that cannot be excluded under the 

Australian Consumer Law. You are entitled to 

a replacement or refund for a major failure and 

compensation for any other reasonably foreseeable 

loss or damage. You are also entitled to have the 

goods repaired or replaced if the goods fail to be of 

acceptable quality and the failure does not amount 

to a major failure. 
This Warranty gives you additional protection for 

your Goldacres product and identifies a preferred 

approach to resolving warranty claims which will be 

the quickest and simplest for all parties subject to 

the exclusions, terms and conditions below.
Goldacres warrants its authorized Dealers who in 

turn warrants the original purchaser (Owner) that 

each new Goldacres Product will be free from 

proven defect in materials and workmanship for 

twelve (12) months from the date of delivery to the 

first owner according to conditions outlined herein.

Subject only to legislative obligations to the 

contrary, Goldacres shall not be liable for incidental 

or consequential damage resulting from ownership 

or use of a Product.
Goldacres does not authorize any person to create 

for it any other obligation or liability in connection 

with these products.
The repair of the defective Product qualifying under 

this warranty will be performed without charge 

for labour and parts by any authorized Goldacres 

service outlet within a reasonable time following the 

delivery of the Product, at the cost of the owner, to 

the service outlet / place of business advised
Goldacres in its absolute discretion may choose 

to pay the cost of replacement or repair of the 

product.
If the Product will be repaired or replaced, using 

parts as supplied by Goldacres, repair may include, 

at Goldacres discretion, the replacement of parts 

with functionally equivalent remanufactured, 

reconditioned or new parts.
Goldacres may request failed parts to be returned 

to the factory.

Conditions of Warranty Coverage

The warranty covers only conditions resulting 

directly from defects in workmanship or materials 

used under normal use and service conditions.
The Warranty is not transferable. 
The owner is responsible for the performance of 

regular maintenance and service as specified in 

the owner’s / operators manual applicable to the 

product. Failure to follow regular maintenance as 

advised may invalidate the warranty.
The owner must provide the Goldacres Dealer with 

prompt written notice of the defect (within 14 days 

of it occurring) and allow reasonable time for repair 

and/or replacement.

Goldacres warranty cover excludes:

•  Claims resulting from misuse, use of 

incompatible chemical or fluids, exceeding the 

Product’s specifications including overloading, 

impact damage, negligence, accidental damage or 

failure to perform recommended service or service 

intervals or use the Product with good care.
•  Failure due to faulty or inadequate electrical 

sources of power. 12 volt power sources must be 

checked for suitability to operate the product.
•  The time taken to remove and re-install 

warranted parts, products or components fitted 

to other than Goldacres brand products will not 

be covered by Goldacres Warranty. Only labour 

and parts directly attributable to the repair of the 

Goldacres unit is covered.
•  The cleaning of parts or products before or after 

the warranty repair. Cleaning time is considered a 

customer expense.
•  Any Goldacres Product which has been repaired 

by other than an authorized Goldacres dealer in a 

way which, in the sole and absolute judgment of 

Goldacres, adversely affects its performance or 

reliability.
•  The replacement of maintenance items such as 

diaphragms, batteries, belts, etc.
•  Loss of time, inconvenience, loss of use of 

the product, liability to third parties or any other 

consequential damages including damage to 

crops, profits or revenue, other commercial losses 

inconvenience or cost of rental or replacement 

equipment.
•  Incidental costs associated with a warranty 

repair including any travel costs, out of hours 

labour charges, transportation costs, freight costs 

or any communications costs.
•  Goldacres products purchased at auction or in 

used condition.
Procedure for claiming:
Claims must be made through a Goldacres Dealer. 

To make a claim under this Warranty, you should
•  Contact your local Goldacres Dealer,
•  Phone 1300 301 853 to locate a Goldacres 

Dealer.
Owners returning products to a Goldacres Dealer 

will require the original Dealer tax invoice, a copy 

of the tax invoice or delivery docket and any 

instruction manuals, information booklets or guides 

that were shipped with the Product.

Summary of Contents for FIRE FIGHTING 450L





























Reviews: